Rpanion-server 0.7.0 User Manual

This page describes how to use Rpanion-server version 0.7.0.

The installation instructions can be found at the main Rpanion-server page

This manual assumes that Rpanion-server is up and running at http://10.0.2.100:3000.

Rpanion-server assists and automates the managing of commonly used functions of a Companion Computer.

This includes network configuration for Wifi and wired networks, low latency video streaming, MAVLink telemetry streaming and tlog/binlog management. It is all managed from a Web based GUI.

• Added shutdown button
• Added button to disable all Wifi adapters
• Numerous GUI enhancements in line with Bootstrap UI
• Support MJPEG cameras for video streaming
• Password for Wifi networks hidden by default
• Disk space usage shown on About page
• Removed all popups and replaced with Bootstrap UI elements

The Network page allows the companion computer's network settings to be viewed and changed. This includes both Wifi and wired (Ethernet) based connections.

Network management is done on an adapter (hardware device) and connection (collection of network settings) basis. Each adapter can have one connection active at a time.

Connections for an adapter can be added, edited or deleted via the named buttons.

Connections can be shared across adapter of the same type (i.e. Wifi) unless the “Attach to specific adapter” option is used.

When a connection is “Active” that means the adapter is active and using that connection's settings.

Settings are saved between reboots.

If debugging of network settings is required, the “nmcli” tool can be used for checking the connections.

To disable all WiFi interfaces (also known as Flight Mode), toggle the “Wifi Interfaces Enabled” button. When disabled, the Wifi connections will not be able to be edited.

The Flight Controller page controls the telemetry (MAVLink) input and outputs from a connected flight controller.

To enable telemetry from a connected flight controller, ensure the correct device, baudrate, dialect and MAVLink version are selected, then click the “Start Telemetry” button. If successful, the “Status” section of the page will show incrementing packet numbers, the vehicle type, firmware type and connection state.

Any status text (statustext MAVLink message) from the flight controller will be displayed in the text box marked “Console Output”.

To forward telemetry across a network via UDP, enter the destination in “IP:port” format in the “Add new output” text box, then click “Add”.

To stop telemetry, click the “Stop Telemetry” button. This will also allow the connection settings to be changed.

The connection settings will be saved between reboots.

The Flight Logs page manages the telemetry logs (tlogs) and dataflash (bin) logs from the connected flight controller.

If logging is enabled (via the checkbox on the page), Rpanion-server will log all recived MAVLink packets to a tlog file. These logs can be downloaded via clicking on the log file name in the table.

Dataflash logs will be logged according to the settings on the flight controller. In ArduPilot, set the LOG_BACKEND_TYPE parameter to use “MAVLink” to enable Dataflash logging to Rpanion-server.

Rpanion-server will start a new tlog:

• On boot
• When flight telemetry is started on the Flight Controller page
• When the user clicks the “Start new Logfile” button

A logfile can be downloaded via clicking on the logfile name.

To delete all inactive (not currently being used for logging) logfiles, click the “Clear inactive logs” button for each log type.

The Video Streaming page controls the ability to stream video from a connected camera to the network via an RTSP stream.

For the video streaming options, Rpanion-server will automatically detect any webcams or the Raspberry Pi camera (if fitted) and query each device for its available resolutions. Options are also given for video rotation and datarate. When running, Rpanion-server will use GStreamer to start an RTSP server and will transmit H.264 compressed video to any connected video clients.

Connection strings for popular software packages will be shown on the page. If the companion computer is running on multiple networks, ensure the correct IP address is used.

If the selected video device does not natively output H.264, it will automatically be converted and compressed to H.264. On less powerful companion computers, real-time compression may not be possible at higher video resolutions.

Note that only one video device can be streaming at a time.

Note that if VLC is used, there may be up to 2 seconds of video latency. If low latency is required consider reducing the “caching” option in VLC or using gstreamer instead.

The about page displays high level hardware and software information about the companion computer - including the OS version, node.js version and Rpanion-server version.

The companion computer can be shutdown from here, by clicking the “Shutdown” button.

In the case of the Raspberry Pi, it will also show an connected HAT devices.